.jpg)
Schneider Electric, Conext TX 2800 NA Inverter, 2800W, 878-2801
- Item #: 878–2801
Conext TX 2800 NA
Input
Model number: 878–2801
PV input voltage, Maximum Power Point range: Certified operating range: 195–550 VDC
Absolute maximum array open circuit voltage: 600 VDC
Maximum PV input current: 15.5 ADC (240 VAC), 14.9 ADC (208 VAC)
Maximum array short circuit current: 24 ADC @ STC
PV reverse polarity protection: Shunt diode
Array grounding: Array negative is grounded internally via 1 A fuse
PV ground fault protection: GF detection when 1 A fuse clears
Output
Nominal AC output voltage: 240 VAC 208 VAC
Maximum AC output power: 2800 W 2650 W
AC operating range, utility voltage (phase to phase)*: 212–263 VAC 184–228 VAC
AC operating range, utility voltage (phase to neutral)*: 106.1–131.5 VAC
AC nominal output frequency: 60 Hz
AC operating range, utility frequency*: 59.3–60.5 Hz
Startup current: 0 A
Maximum AC continuous output current 11.8 A 13.0 A
Maximum output fault current: 15 A
Maximum output overcurrent protection (internal AC fuse rating) 15 A
Maximum utility backfeed current 0 A
Total harmonic distortion < 5%
Power factor > 0.99 (at rated power);> 0.95 (full power range)
Utility monitoring: AC voltage, frequency, and anti-islanding protection
Output characteristics: Current source
Output current waveform: Sine wave
*Factory settings can be adjusted with the approval of the utility. The Conext Inverter is provided with adjustable trip limits and can be aggregated above 30 kW on a single Point of Common Coupling.
Ships in 3-5 buinsess days
- Part No.: 878–2801
- Quantity: 1
