Wiley Electronics WEEB For Pole/Ground Mount WEEB-9.5

Wiley Electronics WEEB For Pole/Ground Mount WEEB-9.5
Click To Enlarge
  • Item #: WEEB-9.5

WEEB-9.5 Assembly:

Press one WEEB-9.5 into two of the four 9.5 mm (3/8 inch) holes in the mounting structure.  The retaining fingers will keep the WEEBs from falling out while the PV module is aligned to the mount.  Each of the two WEEB-9.5s should contact a different mounting member.  Insert 1/4-28 bolts and tighten until the dimples are completely embedded and the two aluminum pieces are flat against the body of the WEEB.  A large washer will help to embed the dimples when using thin or malleable metals.  The embedded dimples will make a gas tight mechanical connection and thus ensure good electrical connection.

  • Material: 304 stainless steel
  • Listed to UL467 by ETL
  • Outdoor rated
  • Maximum electrical equipment ground conductor size when used with 2 WEEBs contacting each module in an assembly: 6 AWG

Model number:

WEEB-9.5   For 1/4 inch bolted connections  

WEEB-9.5NL   Without retaining fingers, up to 3.8 inch bolted connections  

WEEB-11.5   For higher currents, up to 3/8 inch bolted connections

Ships in 3-5 business days

  • Part No.: WEEB-9.5
  * Marked fields are required.
Qty*
Price $1.05

Related Items